Commerce Assistant: multifunctional utility for knowledgeable buying and selling – Different – 26 March 2025

Commerce Assistant: multifunctional instrument for a handy buying and selling

The utility is split into 4 primary tabs:

1. [new] tab: New trades, Lot / Danger / Danger-Reward calculation.
2. [manage] tab: Commerce administration, Breakeven, Trailing, Auto-Shut, Auto-Ranges.
3. [info] tab: Commerce statistics, market evaluation.
4. [tool] tab: Indicators and auxiliary utilities.

Clickable Hyperlinks:

---

[manage] tab: handle the present trades


This tab is designed to management the present trades, together with the automated capabilities.

This tab consists of 6 subsections, every of them might be described under.

1. Teams: shut or handle the trades grouped into completely different classes.
2. Order: handle a single commerce, or a number of chosen trades on the similar time.
3. BE: transfer SL to break-even, or activate the computerized BE perform.
4. TR: computerized trailing: for SL ranges / for pending orders.
5. AC: Auto-Shut perform: shut the commerce robotically, on the specified situation.
6. AL: Auto-Ranges: if the commerce would not have SL/TP but, it will likely be set robotically.
• The utmost slippage when closing a commerce will be set within the settings [s] on the [new] tab.
• On the high of this tab, the present floating revenue / loss of the complete account is displayed.
• To continuously replace a floating knowledge on the present trades, you’ll be able to activate the choice within the settings [s]: the CPU load will improve, however it could be helpful for short-term merchants.

Fast commerce administration: if the [T] is lively, current trades might be visualized on the chart. If you click on on the chart button, the fast management panel will open, the place you’ll be able to carry out an important actions with out switching to a different tab:

• [X]: click on to shut the commerce.
• [BE]: if will be utilized – click on to maneuver the SL degree to breakeven.
• [x %]: kind a % of the present lot to shut the commerce partially, or to improve the lot dimension. The worth might be normalized to the closest potential lot;
• Click on [%] to verify and alter the lot dimension.
• Whereas rising the lot dimension for the lively positions: an extra place might be opened by market, with the identical SL / TP ranges.
• [sl]: click on to set a brand new SL degree in simply 2 clicks.
• [tp]: click on to set a brand new TP degree in simply 2 clicks.
• To set a brand new SL / TP degree in simply 2 clicks:
• Guarantee that the brand new desired degree is seen on the chart;
• Activate the extent setting by clicking the inexperienced [sl] / [tp] button;
• Subsequent, watch out: click on on the chart degree the place a brand new sl / tp must be positioned;
• After clicking on the chart, a brand new degree might be utilized and you will see a message;
• sl [X]: click on to take away the SL degree (if exist).
• tp [X]: click on to take away the TP degree (if exist).
• [R]: click on to Reverse the commerce (initially chosen commerce might be closed):
• For lively trades: new commerce might be opened by market;
• For pending orders: new order might be positioned to the identical entry worth;
• [C]: click on to Copy the chosen commerce (initially chosen commerce is not going to be closed):
• For lively trades: new commerce might be opened by market;
• For pending orders: new order might be positioned to the identical entry worth;
• [M]: click on to activate a pending order by the Market.
• [<>]: click on to start out a sophisticated commerce administration.
• It’s also possible to change / take away the identification colour on the Fast panel.

To cease a fast commerce administration: click on on the chart (outdoors of the fast panel), or ESC.

[Groups]: shut / modify the trades, grouped by differing types


• On the first line: both choose [ALL] Symbols, or specify a selected [Symbol] for administration.
• You possibly can handle a group of various symbols concurrently, for instance:
  kind ‘GBP‘ to handle GBP/USD, EUR/GBP and different symbols with ‘GBP‘ on the similar time.
• On the first line you’ll be able to moreover filter the trades by the interior ID and the digital colour, if it was specified earlier than the execution on the [new] tab.

Concurrently shut lively trades grouped by 6 differing types.

Use the blue change to pick which a part of the lively trades must be closed:

1. [Close full]: lively trades might be totally closed;
2. [Close %]: specify the % of the present lot dimension to be closed:

When the partial shut [Close %] is chosen:

P/L and Lot dimension info is displayed for the quantity that might be closed.

Within the settings [s] you’ll be able to select the strategy of accounting for trades, if the lot cannot be divided:

• [Skip the trade]: don’t shut, if the lot cannot be divided precisely by the desired %;
• [Close the nearest lot]: the very best lot might be closed: e.g. when you set [Close %] = 50: a commerce with a Lot = 0.03 cannot be divided to 0.015: it would have both 0.01 or 0.02 closed: relying on the course chosen in settings [s] on the [new] tab.

If you click on on the corresponding inexperienced button, all trades of the chosen group might be closed:

• [ALL]: click on to shut all lively positions
• [Profit]: click on to shut all worthwhile trades
• [Loss]: click on to shut all loss-making trades
• [Buy]: click on to shut all lively lengthy trades (buys)
• [Sell]: click on to shut all lively quick trades (sells)

To the precise, details about the Revenue / Lack of all lively trades for every class is displayed:

• P/L within the account forex;
• 2nd worth will be chosen with the blue change:
• Revenue / Loss: in [pips] / [points] / [% of the account size]
• Complete [Lot] dimension of all trades withing the group
• The fitting column reveals the amount of trades discovered for every class: #

Decrease, you’ll be able to shut the trades whose revenue / loss exceeds the desired worth:

1. Choose revenue / loss utilizing the blue change: [if profit >] / [if loss >]
2. Set the quantity of revenue / loss: commerce might be accounted if its P/L exceeds this worth
3. You possibly can change the P/L calculation technique with the [blue witch]:
   pips / factors / forex / % worth change / % of the account dimension
4. To the precise, inexperienced (revenue) / pink (loss) button will present what number of trades match the desired standards:
   if you click on on this button, the trades might be closed.

Decrease on this tab you’ll be able to handle: Pending / Scheduled orders, TP / SL / Cancellation ranges:

• [Delete]: [Limit] / [Stop] orders: click on to delete all chosen pending orders.
• [Remove]: click on to take away the chosen kind of degree from all chosen trades:
• [SL] / [TP] on lively trades,
• [SL] / [TP] / [Expiration] / [Cancellation levels] on pending orders.
• [Delete all if OCO id =]: click on to delete all pending orders with the desired OCO id.
• [If pending] [>] / [<]: shut all orders if they’re pending longer / lower than the desired time.
  The time interval will be modified with the blue change: [minutes] / [hours] / [days].
• [Delete]: click on to delete all chosen pending trades:
  [StopLimit] / [BUY] / [SELL] / [Hidden] / [ALL pending] orders
• [Hide] / [Unhide]: click on to cover [TP] / [SL] / [Pending orders] from the dealer, or to make them seen once more.
• [delete] / [activate]: actions for scheduled orders (opened with a [Place later] choice).
• [pause] / [unpause]: actions for Hidden orders. When the hidden order is on pause – it is not going to be triggered till you activate (unpause) it once more.



[Order]: handle the present commerce, or a gaggle of the trades


You possibly can choose the commerce(s) for administration in 4 alternative ways:

1. Click on on the corresponding button on the chart, if [T] button is lively;
2. Discover the commerce by the search bar. You possibly can kind:
   a) The ticket quantity;
   b) The identify of the Image: all trades that match the request might be displayed: to pick the commerce to handle, click on on the corresponding button;
   c) Kind ‘ALL‘ to see all trades that match the chosen filters;
3. Choose the commerce from a Hotkey: if the ticket was saved after the execution on the [New] tab;
4. To handle a number of trades without delay, you’ll be able to choose them within the following methods:
   a) Select the commerce kind utilizing the blue selector;
   b) Draw a worth vary(s) on the chart: commerce might be included into the choice if its entry worth lies throughout the specified space(s): (click on on the present chart vary to regulate/delete it).
   c) Draw a time vary(s) on the chart: commerce might be included into the choice if its entry time lies throughout the specified space(s): (click on on the present chart vary to regulate/delete it).
   d) Add a commerce individually from the chart utilizing the [+] button;

If you happen to set a commerce kind and draw a chart vary on the similar time – each filters might be checked: e.g. when you select ‘Pending orders’ and draw a chart vary – solely pending orders might be chosen from the desired space: lively trades is not going to be included.

You possibly can moreover filter the trades:

• by the interior ID: [All id] / [id:] change. id will be specified earlier than the execution on the [new] tab);
• filter by the identification colour.
• All filters are summed up.

After deciding on the commerce(s), a new interface might be displayed. To cancel the choice: click on [x] (1st line), kind a brand new request within the enter discipline, or click on ESC.



[manage] [Order]: whereas managing a single commerce


1. Total details about the commerce:

• Image, commerce kind, lot dimension. Click on on the Image’s identify to set the identification colour.
• Entry worth and entry time;
• Current TP and SL ranges: if they’re set – there might be an additional buttons:
• Click on [X] to cancel the TP/SL degree;
• You possibly can conceal / unhide the extent from the dealer utilizing the [hide] / [unhide] button.
• Present R/R ratio (if out there).
• Commerce’s opening time is visualized on the chart: vertical line.
• For lively place: present swap quantity, and the swap dimension that’s debited every day;
  For pending orders: present expiration time. If exist: click on [X] to take away it.

2. Change the commerce parameters:

• Set a brand new TP / SL ranges manually. There are 4 calculation varieties out there, which will be chosen utilizing the blue change:
  worth / pips / factors / % of the worth change.
• You possibly can calculate a brand new TP / SL primarily based on the desired R/R, utilizing the interface on the road 5:
• If the commerce has a TP, you’ll be able to calculate a brand new SL primarily based on the R/R: [set] [sl]
• If the commerce has a SL, you’ll be able to calculate a brand new TP primarily based on the R/R: [set] [tp]
• You possibly can drag and alter SL, TP, Entry, Set off ranges straight on the chart (when managing a commerce of the identical Image as the present chart).
• It’s also possible to drag the TP/SL zone to maneuver all current ranges (Entry, SL, TP) without delay, whereas managing a pending order.
• When adjusting the present SL/TP ranges, you’ll be able to maintain the present R/R ratio:
  to allow this selection, activate the [RR:] button on the sixth line.
• [Multi tp]: click on to allow / disable extra Take Revenue ranges.
  If the commerce already has a Multi TP ranges, their amount might be displayed on the button.
• To regulate the degrees, click on the [v] button: an extra window might be displayed.
• You could find extra information concerning the Multi TP interface within the description of the [New] tab.

3. Copy / reverse the chosen commerce:

• You possibly can open a [Copy] / inverted copy [Reverse] of the commerce, whereas preserving all current commerce parameters.
• New commerce will be opened both on the [Same entry] worth, or with the [Market entry]
• Click on [Open] to execute the brand new commerce.
• Within the settings [s] > [Trading] you need to use the choice ‘shut the preliminary commerce when it is accomplished‘. If it is lively, then with manually copying / reversing the chosen commerce, the preliminary commerce might be robotically closed: thus, solely the newly opened copy will stay.
• Click on [v] button to make use of the prolonged copy commerce choice. An new panel might be opened, the place you’ll be able to set the variety of new trades, alter the lot dimension, set a customized entry worth, and verify the potential P/L.

You possibly can handle the commerce even when the market is closed:

• When making an attempt to use modifications on the closed market, you’ll be prompted to schedule a job: when you verify, the scheduled duties might be displayed on the panel.
• You possibly can cancel any job by clicking on [X].
  Please notice: when you schedule the closing of an lively commerce, the place might be closed when the market opens: thus, the ultimate closing worth shouldn’t be mounted, and the potential revenue/loss can’t be identified upfront. Watch out for worth gaps!

When managing an lively place :

• [Close by]: click on to shut the commerce by a counter place. If will be utilized: if you click on on the button, a separate window will open the place you’ll be able to select the alternative commerce with which you wish to shut the present place. After the choice, click on the blue button to verify.
• [SL to BE]: click on to rapidly transfer the SL degree to breakeven.
• [Close full]: click on to shut the place. The button additionally reveals the floating revenue / loss;
• Half : if the lot dimension will be divided, you’ll be able to set the quantity for partial shut.
  Use the blue change to specify the [lot] dimension itself / or a [%] of the present lot.
  Click on on the following button to partially shut the commerce: the button additionally reveals the quantity of revenue / loss that might be closed.

When managing a pending order:

• You possibly can rapidly change the expiration time of the order.
  The time interval will be chosen utilizing the blue change: [Minutes] / [Hours] / [Days].
• [Delete order]: click on to delete the chosen pending order.
• [Hide / Unhide order]: click on to cover the order from the dealer, or make it seen once more.
• [pause / unpause]: click on to pause a order once more, or activate it once more.
• OCO id row:
• If the order would not has an OCO id but: you’ll be able to [Set] it.
• If the order has an OCO id: you’ll be able to take away it [X].
• If there are every other orders with the identical id: you will see a [delete x others] button:
  If you click on on it – all different pending orders with the identical OCO id might be deleted.
  It’s also possible to verify the listing of all current trades with the identical OCO ID: [v] button.
• Cancellation degree will be managed on the backside of the panel:
• If the order would not has a Cancellation degree: you’ll be able to [Set] it;
• If the order has a Cancellation degree: you’ll be able to take away it [X], or alter it on the chart;
• When adjusting the present SL or Entry degree: [Preserve Risk %] button will seem.
  If it is lively, then when making use of a brand new SL degree, the preliminary share of threat on the commerce might be preserved: a brand new pending order with an adjusted lot dimension might be opened, and the present order might be deleted. Adjusted lot dimension is displayed subsequent to this button.
• You possibly can modify the lot dimension for the order: click on on the [v] selector on the 2nd line. A brand new lot will be calculated primarily based on the specified threat dimension, if the commerce already has a SL degree.
• If you click on [Modify Lot]: a brand new pending order with an adjusted lot dimension might be opened, and the present order might be cancelled.



[manage] [Order]: whereas managing a number of trades without delay


1. Total details about the chosen trades:

• Complete variety of the chosen trades: hover a mouse over it to verify the common Entry worth, or click on on it to set the identification colour for all chosen trades.
• Complete lot dimension of all chosen trades;
• Floating P/L (if any lively trades are chosen);
• Current TP / SL ranges. If they’re set, there might be additional components:
• Click on [X] to take away TP/SL on all chosen trades;
• The variety of trades which have a TP/SL degree.
• If all TP/SL ranges are the identical: you will see the precise TP/SL worth ;
• Potential revenue / loss for all trades which have a TP/SL;
• If have any lively trades: present Swap, and swap quantity that’s debited every day;
• If have any pending orders: present expiration information . If expiration is ready on any order:
• Click on [X] to take away expiration on all chosen pending orders;
• The variety of orders which have an expiration time;
• [L] button: click on to cover all commerce ranges and depart solely the degrees of these trades which might be chosen for administration.

2. Change the commerce parameters:

• You possibly can [Set] a brand new frequent expiration time;
• OCO id: you’ll be able to [Set] or take away [X] it;
• Cancellation degree: you’ll be able to take away [X], or [Set] it (if all orders could have a standard degree);

3. Shut the chosen trades:

• [Close All]: click on shut all chosen trades.
  
  If any lively commerce is chosen:
• You possibly can alter the present lot dimension: use the [v] selector on the first line:
• New lot dimension will be set in methods:
• Kind a brand new lot dimension itself: all chosen orders may have a standard lot;
• New lot as a % of the present lot : it will likely be calculated individually for every order;
• If any pending order has a SL degree: you’ll be able to set a [Risk] dimension: new lot might be calculated and utilized solely to the orders with a SL degree.
• Potential revenue / loss will also be checked;
• Click on [Modify Lot size] to use a brand new lot dimension(s): new pending order(s) might be opened as an alternative of the at the moment chosen orders.



---

Necessary! When activating computerized capabilities (Auto BE, Trailing, A-Shut, A-Ranges): it would proceed to work even you probably have closed (or modified) the chart the place it was activated, if the utility is working on the opposite chart. To cancel the automated perform – don’t forget to deactivate it on the panel: [x] button.

---

[BE]: transfer Cease Loss to breakeven


This part consists of two subsections:

1. [Move SL to BE now] : manually transfer SL to breakeven for the desired trades.
2. [Auto BE]: computerized breakeven perform, when a commerce turns into revenue.

[Move SL to BE now] subsection:

The method of manually shifting SL to breakeven:

1. Specify a selected [Symbol] , or choose [ALL] Symbols.
2. Choose the kind of trades for which you wish to apply breakeven:
   a) [ALL] : all lively trades;
   b) [Longs] : purchase trades solely;
   c) [Shorts] : promote trades solely;
   [if profit >] : if lively, SL might be moved on trades provided that revenue exceeds the desired worth.
3. [+ Offset] : optionally, you’ll be able to set an extra shift of the SL degree, within the course in direction of the TP degree. Thus, SL will be moved not solely to breakeven, but in addition to the worthwhile degree.
   Utilizing the [v] selector, you’ll be able to select the strategy of the revenue and offset calculation:
   cash / pips / factors / % of SL dimension / % TP dimension / % of worth change / % of the account dimension / unfold dimension
   ! When utilizing [% / SL] or [% / TP] strategies: commerce might be included provided that it has a SL / TP degree.
4. The inexperienced button on the high will present you the variety of trades that suit your standards. If you click on on this button, the SL might be moved.
5. Utilizing the [L] button, you’ll be able to pre-view the potential BE ranges on the chart.

[Auto BE] subsection:

The method of activating the automated breakeven perform:

1. Choose the Image or Commerce for which the Auto BE perform might be activated:
   for the present [Symbol] / for [ALL] trades / or for a selected commerce [Ticket].

   Along with the [Symbol] or [ALL] guidelines – you’ll be able to set a separate rule for a specific commerce, by its ticket quantity: the rule for a separate [Ticket] might be prioritized.

2. Choose the kind of trades for which you wish to activate auto BE:
   a) [ALL]: for all lively trades;
   b) [Longs]: for purchase trades solely;
   c) [Shorts] : for promote trades solely;
3. [When profit] : SL might be moved solely when the commerce reaches the desired revenue quantity.
4. [+ Offset] : optionally, you’ll be able to set an extra shift of the SL degree, within the course in direction of the TP degree. Thus, SL will be moved not solely to a breakeven, but in addition to the worthwhile degree.
5. Click on [Activate Auto BE] to allow the auto breakeven perform.

The decrease part shows the present standing of the automated BE perform. If auto BE is lively, you will see a pink cross [X] : click on on it to deactivate the auto BE for the chosen commerce kind (1).
[report] : click on to verify the place Auto BE is lively: helpful when you commerce loads of Symbols.

When activating it for a Ticket quantity (similar as chart image): you’ll be able to preview BE degree on the chart.

! Auto BE for [Ticket] have to be deactivated individually by its quantity:
when deactivating [ALL] / [Symbol] – all separate [Ticket] guidelines will proceed to be lively.

It can save you the Auto BE settings to a [Presets v] , to activate the perform quicker.

Within the settings [s] you’ll be able to embrace the unfold, fee and swap price to the calculation of the BE degree.



---

[TR]: computerized trailing: for SL ranges / for pending orders

• On the high of the tab: click on [Activate Trailing] to allow trailing, or [X] to deactivate it.
• On the backside you’ll be able to verify the present trailing standing.
  [report] : click on to verify the place Trailing is lively: helpful when you commerce loads of Symbols / tickets.
• It can save you the present settings to a [Presets v] , to activate the trailing quicker.

Trailing for [Ticket] have to be deactivated individually by its quantity:
when deactivating [ALL] / [Symbol] – all separate [Ticket] guidelines will proceed to be lively

[Trailing stop] subsection: computerized SL trailing on the lively trades.

To activate the auto Trailing Cease perform, it’s good to set 4 parameters:

1. Image or Commerce for which the trailing might be utilized:
   for the present [Symbol] / for [ALL] trades / or for a selected commerce .

   Along with the [Symbol] or [ALL] guidelines – you’ll be able to set a separate rule for a specific commerce, by its ticket quantity: the rule for a separate [Ticket] might be prioritized.

2. The second when the trailing might be utilized to the lively place:
   a) [Immediately after execution]: and not using a delay after the commerce opening;
   b) [When profit]: SL might be moved when revenue will attain the desired worth;
3. ‘SL technique’: set the strategy of calculating the degrees, utilizing the [v] selector:

   a) Measurement in Pips or Factors;

   b) Share of the worth change;

   c) SL primarily based on the Transferring Common (MA). When selecting this kind, it’s best to set:
   Timeframe for calculating the MA; MA interval; MA technique; The bar worth;
   Calculated bar offset: relative to the present (floating) bar.
   The gap from the MA, the place the SL degree might be positioned: when set to 0 – SL might be equal to the worth of the MA, constructive values will imply that the SL must be shifted nearer to the TP degree, damaging values will imply an offset farther from the TP degree.

   d) SL primarily based on the bar worth. When selecting the sort, it’s best to set:
   • 1 or 6 bar costs: Open / Excessive / Low / Shut / wick: close to / wick: far;
   • [wick: near]: Excessive worth for Purchase trades, Low worth for Promote trades;
   • [wick: far]: Low worth for Purchase trades, Excessive worth for Promote trades;
   • Timeframe; • The gap of the bar, relative to the present (floating) bar;

   e) Share of the Take Revenue dimension: this technique will solely work if the commerce has a TP;

   f) Development Line technique: solely when Trailing Cease is configured for a selected Image (not for );

   g) ATR technique: SL dimension might be calculated as a % of the present ATR worth.

   h) Parabolic SAR technique: SL dimension might be calculated primarily based on the indicator’s worth.

   i) Share of the preliminary SL dimension: this technique will solely work if the commerce has a SL;

   j) Scale back SL by: at every trailing occasion (4), if market moved additional within the commerce course, current SL dimension will lower by the desired worth. So the space to SL degree might be continuously lowered, not mounted.

4. ‘Transfer SL‘: select the SL motion rule, utilizing the [v] selector (how usually SL must be moved):
   a) Time interval: SL might be moved after a specified time interval;
   b) When the worth strikes in direction of TP by a given quantity of pips / factors;
   d) Continually (at each worth tick);
   e) When the worth strikes within the course of TP by a given share worth;
   f) When a new bar is shaped on the chosen timeframe;
   g) When worth strikes in direction of TP by a specified share of the TP dimension: provided that commerce has a TP degree;

[Order trailing] subsection: computerized trailing of pending orders.

To activate the Order Trailing perform, it’s good to set 4 parameters:

1. Image or Commerce for which the trailing might be utilized:
   for the present [Symbol] / for [ALL] trades / or for a selected commerce [Ticket].

   Along with the [Symbol] or [ALL] guidelines – you’ll be able to set a separate rule for a specific commerce, by its ticket quantity: the rule for a separate [Ticket] might be prioritized.

2. The second when the trailing might be activated to the pending order:
   a) [Immediately after execution]: and not using a delay when the order is positioned;
   b) [If pending > than]: trailing will begin after the desired time;
3. The distance from the present market worth to the entry worth.
   This distance might be maintained when trailing, if the market strikes away from the entry:
   but when the market worth approaches the entry, the order is not going to be moved. It could be:
   a) [automatic]: might be decided for the time being when the trailing begins (pt. 2).
   b) Or you’ll be able to set it [manually]: in pips / factors / % of the market worth.
4. The rule for shifting SL / TP ranges.You possibly can both disable their motion, or you’ll be able to allow the motion of every of them.
   The preliminary distance from the entry worth to the degrees will at all times be maintained.



---

[AC]: Auto-Shut perform


Utilizing this perform, you’ll be able to automate the closing of trades beneath a given situation.

To activate the Auto-Shut perform, it’s good to set the next parameters:

1. Image for which the it will likely be utilized: particular [Symbol] / or [All Symbols] ;
2. [if total] / [if single] / [at time] : relying on this worth, there’ll both be an choice to shut when Revenue / Loss is reached, or an choice to shut at a specified time.

Settings for the [close at Profit / Loss] choice:

1. [if total] / [if single] : rely P/L on: all chosen trades collectively, or on every commerce individually;
2. [Floating] / [Potential] : accounting for floating P/L (on open trades), or accounting for potential P/L (when TP/SL ranges might be reached);
3. [Profit] / [Loss] / [P/L] : what must be calculated: Revenue, Loss, or [Profit or Loss];
4. [On active] / [On pending] / [On both] : commerce kind to which the perform might be utilized;
5. The quantity of revenue / loss: upon reaching it, the commerce(s) might be closed:
   The tactic of the P/L counting will be chosen utilizing the [v] selector;
6. Shut [Active] / [Pending] / [Both] : the commerce kind to be closed when the situation is met;
7. [All calculated] / [Till normal] : the variety of trades that should be closed:
   both all chosen through the calculation, or maintain closing till the P/L worth is normalized;

Settings for the [close at time] choice:

1. You possibly can both set the [Local time] when trades must be closed (the time of your gadget), or you’ll be able to specify the time interval [After] which the trades must be closed.
2. Shut [Active] / [Pending] / [Both] : commerce kind to be closed when the time situation is met;
• On the high of the tab: click on [Activate A-Close] to allow, or [X] to disable the auto-close;
• [report] : click on to verify the place Auto-Shut is lively: helpful when you commerce loads of Symbols.
• On the backside of the tab you’ll be able to verify the present standing of the auto-close perform.
• It can save you the present settings to a [Presets v] , to activate the perform quicker;



---

[AL]: Auto-Ranges perform


Utilizing this perform, you’ll be able to automate the setting of SL, TP and Multi TP ranges for trades that don’t but have set ranges. For instance, it may be handy when you execute trades out of your cell phone.

To activate the Auto-Ranges perform, it’s good to set the next parameters:

1. Image for which the trailing might be utilized: particular [For Symbol] / or all [For ALL];
2. if [active position] / [pending order] / [active or pending trade]: relying on this worth, the perform might be utilized solely to lively trades, solely to pending orders, or to all trades;
3. Subsequent, you’ll be able to activate or deactivate every parameter individually:
   a) [SL = ]: if lively, SL might be set robotically if the commerce would not have the SL but.
   b) [TP = ]: if lively, TP might be set robotically if the commerce would not have the TP but.

   • SL / TP calculation technique will be chosen utilizing the [v] selector;
   • Whereas utilizing R/R technique for the TP: the commerce should have a SL degree, in any other case the TP degree cannot be calculated;
   • [H]: if lively, the hidden (digital) SL / TP degree might be set;

   c) [Multi TP : ]: if lively, Multi TP degree(s) might be robotically set for the commerce if no Multi TP degree(s) have been set but.
   • When utilizing [% / TP] / [R/R] strategies for the Multi TP:
   the commerce should have a [main TP level] / [SL level], in any other case the Multi TP degree(s) cannot be calculated;
   • When activating the [C] motion: the partial closure chance might be checked: there could also be circumstances when the lot dimension of the commerce cannot be divided in keeping with the desired worth.

4. «Magic» numbers: [apply to all] / [only for] / [all, expect]: you’ll be able to apply Auto-Ranges just for trades with a given magic quantity / exclude some magic quantity. Handy when you use algo-trading.
• On the high of the tab: click on [Activate A-Levels] to allow, or [X] to disable the auto-levels;
• On the backside of the tab you’ll be able to verify the present standing of the auto-levels perform.
• It can save you the present settings to a [Presets v], to activate the perform quicker;



---

Hyperlinks to the descriptions of the different tabs:

• [new] tab: New trades, Lot / Danger / Danger-Reward calculation.
• [info] tab: Commerce statistics, market evaluation.
• [tool] tab: Indicators and auxiliary utilities.